Installation Instructions - Beko CTB 6253X User Manual

3

Installation Instructions

• The exhaust air must not be discharged into a
flue which is used for exhausting fumes from
other appliances burning gas or other fuels. (Not
applicable for appliances which only discharge
air back into the room)
• The minimum distance between the support-
ing surface for the cooking vessels on the hob
and the lowest part of the range hood: When the
range hood is located above a gas appliance,
this distance shall be 65cm. If the instructions
for installation for the gas hob specify a greater
distance, this must be taken into account. (The
distance of 65cm can be reduced for non com-
bustible parts of range hoods and parts operating
at safety extra low voltage provided these parts
do not give access to live parts. Distance may
be reduced to 60cm to align with the AGA code.
• Regulations concerning the discharge of air have
to be fulfilled
• Warning: Failure to install the screws or fixing
device in accordance with the instructions may
result in electrical hazards
Hood / User Manual
The cooker hoods should be placed at a distance
of 65-75cm from the cooking surface for best
effect. (See Pic 1)
65cm
75cm
Pic 1
Way one: (See Pic 2A)
• To install onto the wall drill 4 holes of Ø8mm
on a suitable place according with the centre
distance of hole in the back of the cooker hood.
• Insert the wall plugs into the holes.
• Insert the screws into the wall pulgs and tight
the screws.
• Put up the cooker hood onto the fixed screws.
• Put the one air outlet and extensible pipe onto
the cooker hood. (the extensible pipe is optional
not supplied)
7 / 13 EN