Installation Instructions - Beko CFB 6400 XA User Manual

3

Installation Instructions

• The exhaust air must not be discharged into a
flue which is used for exhausting fumes from
other appliances burning gas or other fuels. (Not
applicable for appliances which only discharge
air back into the room)
• The minimum distance between the support-
ing surface for the cooking vessels on the hob
and the lowest part of the range hood: When the
range hood is located above a gas appliance,
this distance shall be 65cm. If the instructions
for installation for the gas hob specify a greater
distance, this must be taken into account. (The
distance of 65cm can be reduced for non com-
bustible parts of range hoods and parts operating
at safety extra low voltage provided these parts
do not give access to live parts. Distance may
be reduced to 60cm to align with the AGA code.
• Regulations concerning the discharge of air have
to be fulfilled
Failure to install the screws or fi-
B
xing device in accordance with the
instructions may result in electrical
hazards.
Hood / User Manual
The cooker hoods should be placed at a distance of
65-75cm from the cooking surface for best effect.
(See Pic 1)
65c m
75c m
Pic 1
Way one: (See Pic 2)
• To install onto the wall drill 4 holes of Ø8 mm on
a suitable place according with the centre dis-
tance of hole in the back of the cooker hood.
• Insert the nut into the holes.
• Insert the screws into the nut and tights.
• Put up the cooker hood onto the fixed screws.
• Then use the attached accessories enclosed to
turn the screws into the two holes of inside the
hood, and then fix the screws to tighten the hood
onto the wall.
• Put the one way valve onto the cooker hood.
Way two: (See Pic 2)
7 / 13 EN