Beko CTB 6253X User Manual page 9

3 Installation Instructions
7 Replacement for the front panel
Replace the front panel (80mm) is as below:
- Side the front panel of the cooker hood.
- In order to change front panel, the Al anti-grease filter should be detached firstly. Press the lock and
pull it downward.
- Remove 4 screws in the back of the front panel (40mm)
- Put the front panel (80mm) on the slider board, adjust position in order to keep balance with the hood
body, tighten with enclosed 4 screws.
- Repeat the same way if change to 40mm
Hood / User Manual 9 / 13 EN