Useful Features During A Call - Panasonic KX-TG5664 Operating Instructions Manual

Making/Answering Calls
Using the base unit
1
{SP-PHONE}
2
Speak into the MIC.
3
When you finish talking, press {SP-
PHONE}.
Adjusting the ringer volume
Press {^} or {V} repeatedly to select the
desired volume when in standby mode.
L To turn the ringer off, press and hold {V}
until the unit beeps 2 times.
Setting the ringer tone
There are 3 tones.
1
Press {^} or {V}.
2
Within 10 seconds, press {<} or {>}
repeatedly to select the desired tone.
20
For assistance, please visit http://www.panasonic.com/phonehelp
Useful features during a
call
HOLD button
This feature allows you to put an outside
call on hold.
Handset
1
Press {HOLD} during an outside call.
L To transfer the call to another
extension, continue from step 2 on
page 43, "Transferring calls,
conference calls".
2
Press {HOLD} again.
L To release the hold, press {C}.
L The base unit user can take the call
by pressing {SP-PHONE}.
L Another handset user can take the
call by pressing {C}.
Base unit
Press {HOLD} during an outside call.
L To release the hold, press {SP-
PHONE}.
L Handset users can take the call by
pressing {C}.
Note for handset and base unit:
L If another phone is connected on the
same line (page 10), you can also take
the call by lifting its handset.
L If a call is kept on hold for more than 6
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.