Specification; Requirement For Test; Test Method; Module General Specification - LG 60PA6500 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied all of the PDP TV with PA21A chassis.

2. Requirement for Test

Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 5 minutes prior to the adjustment.

3. Test method

(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC

4. Module General Specification

- 60" 2D FHD
No Item
1 Display Screen Device
2 Aspect Ratio
3 PDP Module
4 Operating Environment
5 Storage Environment
6 Input Voltage
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
152 cm (60 inch) wide Color Display Module
16:9
PDP60R4####,
RGB Closed (Well) Type, Glass Filter (38%)
Pixel Format: 1920 horiz. By 1080 ver.
5) Temp. : 0 ~ 40 deg
6) Humidity : 20 ~ 80%
7) Temp. : -20 ~ 60 deg
8) Humidity : 10 ~ 90 %
AC100 ~ 240V, 50/60Hz
Remark
PDP
LGE SPEC
Maker LG
- 4 -
LGE Internal Use Only