Checking The Eye-Q Operation - LG 60PA6500 Service Manual

* 2D HD EDID data
- 2D FHD RGB EDID data [C/S : 7C]
- 2D FHD HDMI1 EDID data [C/S : 63, 76]
- 2D FHD HDMI2 EDID data [C/S : 63, 66]
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
- 2D FHD HDMI3 EDID data [C/S : 63, 56]
* Vender ID
Input HEX
HDMI1 10
HDMI2 20
HDMI3 30
* Checksum: Changeable by total EDID data.
EDID C/S data
check sum Block 0
(Hex)
Block 1
EDID C/S data
check sum Block 0
(Hex)
Block 1

4.7. Checking the EYE-Q Operation.

(1) Press the EYE Key on the adjustment remote controller.
(2) Check the Sensor DATA ( It must be under 10) and keep
the data longer than 1.5s
(3) Check 'OK'
Green Eye-Check(Factory Mode)
Sensor Data
Power saving mode
(Sensor DATA 0 ~ 4095, Power Saving Mode 0 ~ 12)
* IF you press IN-STAP Button, change Green Eye-check
OSD.
- 10 -
2D-FHD
HDMI RGB
0x63 0x7C
0x76(HDMI1)
0x66(HDMI2)
0x56(HDMI3)
2D-HD
HDMI RGB
0x3F 0x58
0xFC(HDMI1)
0xEC(HDMI2)
0xDC(HDMI3)
9
1
OK
LGE Internal Use Only