Adc Process; Function Check; Check Display And Sound; Usb Download(Epk File Download) - LG 60PA6500 Service Manual

USB DOWNLOAD(*.epk file download)
*
(1) Put the USB Stick to the USB socket
(2) Automatically detecting update file in USB Stick
- If your downloaded program version in USB Stick is Low,
it didn't work.
- But your downloaded version is High, USB data is
automatically detecting
(3) Show the message "Copying files from memory"
(4) Updating is staring.
(5) Updating Completed, The Multi-vision will restart
automatically.
(6) If your Multi-vision is turned on, check your updated
version and Tool option. (explain the Tool option, next
stage)
* After downloading, have to adjust TOOL OPTION again.
1) Push "IN-START" key in service remote controller.
2) Select "Tool Option 1" and Push "OK" button.
3) Punch in the number. (Each of models has their
number.)
4) Completed selecting Tool option.
50PA6500-T*
Tool option 1
Tool option 2
Tool option 3
Tool option 4
Tool option 5

3.1. ADC Process

3.1.1. ADC
■ Enter Service Mode by pushing "ADJ" key,
■ Enter Internal ADC mode by pushing "►" key at "5. ADC
Calibration"
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
60PA6500-T*
37056 49344
39306 39306
3697 3697
54342 54342
10 10
* Caution : Using 'power on' button of the Adjustment R/C ,
power on Multi-vision.
* ADC Calibration Protocol (RS232)
NO Enter
Adjust MODE
Item Adjust 'Mode In'
CMD 1 A
CMD 2 A
Data 0
When transfer the
'Mode In',
Carry the command.
- Adjust Sequence
▪aa 00 00 [Enter Adjust Mode]
▪xb 00 40 [Component1 Input (480i)]
▪ad 00 10 [Adjust 480i Comp1]
▪xb 00 60 [RGB Input (1024*768)]
▪ad 00 10 [Adjust 1024*768 RGB]
▪aa 00 90 End Adjust mode
* Required equipment : Adjustment R/C.

3.2. Function Check

3.2.1. Check display and sound

■ Check Input and Signal items. (cf. work instructions)
1) COMPONENT (480i)
2) RGB (PC : 1024 x 768 @ 60hz)
3) HDMI
4) DVI
5) PC Audio In
* Display and Sound check is executed by Remote control-
ler.
* Caution : Not to push the INSTOP KEY after completion if
the function inspection.
- 7 -
ADC adjust
ADC Adjust
A
D
0 0
1 0
Automatically adjustment
(The use of a internal
pattern)
LGE Internal Use Only