Advertisement
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied all of the 42" 50", 60" PDP TV with PB41A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F),
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
4. Model General Specification
No
Item
1
Receiving System
2
Available Channel
3
Input Voltage
4
Market
6
Aspect Ratio
7
Tuning System
8
Module
9
Operating Environment
10
Storage Environment
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
Specification
1) DVB-T2 / NTSC-M / PAL-M / PAL-N
1) VHF : 2~13
2) UHF : 14~69
3) DTV : 2~69
4) CATV : 1~125
1) AC 110 ~ 240V 50/60Hzz
Colombia
60 inch Wide(1920 × 1080)
16:9
FS
PDP60R6#### (1920 × 1080)
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
Remark
DTV : DVB-T2
- 4 -
LGE Internal Use Only
Advertisement
