Table of Contents
Advertisement
Using your machine
To remove the 360⁰
connector, slide the
release button forward
and un-twist the adaptor.
To re-attach the handheld
to the reach wand, grip
the top of the reach wand,
and line-up the handheld.
Push down firmly until the
handheld clicks into place.
CAUTION: Always switch off the steamer before attaching/detaching the reach wand, floorhead, accessories and twin tank.
Always stand steamer securely against a wall/fixed structure or lie the steamer flat on the floor. The steamer and accessories
get very hot during use, always allow them to cool down before handling. Taps should be turned off when steaming around
them. Don't steam clean ovens, oven surfaces or grills when hot, allow to cool to room temperature first.
IMPORTANT: Always check the tools are clean and free from debris, don't use if damaged, broken or worn.
Then grip the adaptor
and pull it away from
the handheld.
To improve your
comfort, use the
additional handgrip
on the handheld
to support the unit
and help you clean
difficult to reach areas.
Hide quick links:
Advertisement
Table of Contents
