Vax S84-W7-P Let's Get Started page 14

Using your machine
CAUTION: Always switch off the steamer and allow steamer to cool before attaching/detaching the reach wand, floorhead,
accessories and twin tank.
Always stand steamer securely against a wall/fixed structure or lie the steamer flat on the floor in a suitable location so it does
not become a trip hazard or can be stepped on.
When using the steam do not aim towards electrical components such as light fittings, sockets and wiring.
IMPORTANT: Always check the accessories are clean and free from debris, don't use if damaged, broken or worn.
Using the Steam Fresh Power Plus reach wand
Press the reach wand
release pedal and pull
the reach wand and
handheld out of
the floorhead.
Press the centre pad
on the control panel
to select preferred
setting steam/detergent.
With the adaptor and
cleaning tool attached
to the 360� connector,
slide it onto the reach
wand nozzle.
To produce steam squeeze the trigger in short bursts.
Don't hold the trigger continuously to prevent over wetting.
Twist the adaptor
clockwise and listen
for the locking click.
Plug the steamer into
mains and slide the
On/Off switch to on.
The green light will
illuminate when it is ready
to use. The steamer will
automatically set to max
steam (no detergent).
To improve your
comfort, use the
additional handgrip
on the handheld
to support the unit
and help you clean
difficult to reach areas.