Vax S84-W7-P Let's Get Started page 10

Using your machine
Using the floor steamer
IMPORTANT: Never use the steam mop without a microfibre cleaning pad attached to the floorhead.
Never leave the steam mop in one spot for an extended period of time or with a damp or wet microfibre pad attached
as this may damage the floor surface.
CAUTION: This steamer is not free standing, always stand using the wall bracket or securely against a wall/fixed structure
alternatively, lie the steamer flat on the floor in a suitable location so it does not become a trip hazard or can be stepped on.
Place the microfibre
pad on the floor white
side facing up. Place the
floorhead onto microfibre
pad making sure the
microfibre pad covers
the entire floorhead.
Press the button in the
centre of the control
panel to select steam
and detergent setting.
The light will illuminate
at the desired setting:
Plug the steamer into
mains power supply and
slide the On/Off switch
to "On".
Pull handle
backwards to recline.
..
STEAM FU NCT I ONS
.
High Steam
..
Low Steam
.
High Steam and Detergent
Low Steam and Detergent
The orange light will
illuminate to indicate
power on.
To produce steam
squeeze the trigger
in short bursts.
Don't hold the trigger
continuously to prevent
over wetting floors.
The green light will
illuminate to indicate
the steamer is ready
to use. The steamer
will automatically set to
Max steam (no detergent).
Move the steamer slowly
forwards and backwards
across the floor paying
particular attention
to high traffic areas.
Squeeze/release trigger
to release steam
as required.
When the steamer
is switched on the
control panel will
automatically set
to max steam
(no detergent).