Vax S84-W7-P Let's Get Started page 15

The steam reach wand can be used at different
heights for hard to reach places.
CAUTION: Always switch off the steamer and allow to cool before attaching/detaching the reach wand, floorhead, accessories
and twin tank. Always stand securely against a wall/fixed structure or lie the steamer flat on the floor. When using the steam reach
wand do not aim towards electrical components such as light fittings, sockets and wiring.
IMPORTANT: Always check the tools are clean and free from debris, don't use if damaged, broken or worn.
Using the Steam Fresh Power Plus handheld
Standing behind the unit,
press the handheld release
buttons and carefully
release the handheld from
the reach wand.
Plug into mains and
slide the On/Off switch
to on. The green light will
illuminate when it is ready
to use. The steamer will
automatically set to max
steam (no detergent).
Place the reach wand
safely and securely
to one side against
a wall or fixed structure.
Press the button
on the control panel
to select preferred
setting steam/detergent.
Using your machine
To remove the 360⁰
connector, slide the
release button forward
and un-twist the adaptor.
With the adaptor and
cleaning tool attached
to the 360� connector,
insert it into the handheld.
To produce steam
squeeze the trigger
in short bursts.
Don't hold the
trigger continuously
to prevent over wetting.
Then grip the adaptor
and pull it away from
the reach wand.
Twist the adaptor
clockwise and listen
for the locking click.