Table of Contents
Advertisement
5
Select the registered form, and then
select "OK".
For the details about how to register the
form, refer to the Save (see page 83).
When Hard Disk Drive is not installed, the
screen of step 5 is not displayed.
(Hard Disk Drive has been equipped
normally with DP-C354/C264. It is optional
equipment for DP-C323/C263/C213.)
6
Set the order of overlay form, and the
scanned original, and then select
"OK".
Overlay
on Top
Overlay
on Bottom
7
Enter the desired number of copies.
82
Copied with the scanned original
overlaid on the form.
Copied with the form overlaid on
the scanned original.
8
Press the Start key.
When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
Advertisement
Table of Contents
