Table of Contents
Advertisement
BleedThrough
Thin sheets of original can be copied without bleeding through.
The settings of BleedThrough Prevention become invalid if Photo is selected in the Original Type.
When setting the Tint adjustment to More Blue or More Red, the copies may come out with bleed through contamination.
1
Select "BleedThrough Prevention".
To display this screen, refer to step 1 of
Background (see page 24).
If Tracing Paper is selected in Original
Type, BleedThrough Prevention of each
image quality type is set to 3.
2
Adjust the level of BleedThrough
Prevention with "-" and "+", and then
select "OK".
If you change the Background Removal to
the "Off" position, the BleedThrough
Prevention will not be adjustable.
Bleed-
There are 6 levels. The higher
Through
the level, the higher it
Prevention
increases the prevention
effect.
3
Select "OK".
For the following procedure, refer to steps 6
to 8 of Quality Adjusting (see page 23).
25
Advertisement
Table of Contents
