Touch Panel Display; Function Categories - Panasonic DP-6010 Operating Instructions Manual

Touch Panel Display

I I I I I

Function Categories

Tab Name
A BASIC MENU
2-SIDED/ORIG. \
B
COPY
C SORT/FINISH
D ZOOM/EFFECTS
INSERTION/
E
OVERLAY
F JOB MEMORY
I I I I I
Touch Panel Display Brightness Adjustment
To adjust the brightness of the Touch Panel display, press and while holding down the "C"
(CLEAR) key, keep pressing the "ORIGINAL SIZE/A3" or the "COPY SIZE" keys until the desired
brightness is achieved.
ORIGINAL SIZE/A3 : Dimmer
COPY SIZE : Brighter
C During the copy operation and after making copies, the fan motor may start
NOTE
spinning. This is a normal operation and is used to cool
down the copier.
C If you are not going to use the copier for long periods
of time, turn the Main Power Switch on the Back and
the Power Switch on the Left Side of the machine to
the OFF position.
Features
C Initial "Ready to copy" screen.
C Original Mode, Exposure Control and Paper Tray
selection.
C Job selection (Tandem/Remote, Proof Set and etc.).
C Reserved Job(s) verification.
C 2-Sided, 2 Page, Booklet Copy Mode, Multi-Size
Feed and/or SADF function selection.
C Electrical Sort Mode and/or optional Finisher
selection.
C Zoom Copy Mode or Creative Features (Book, Edge,
Margin, Stamping, Centering, Image Repeat or
Inverse Mode) selection.
C Insertion, OHP Interleaving, Overlay or File Edit
Mode selection.
C Job Memory Mode selection.
Operation Chart
See Page
16-26
27
37, 84, 89, 94
38
46
54
5