Tandem/Remote Copy Settings (Registration) - Panasonic DP-6010 Operating Instructions Manual

Basic Menu

Tandem/Remote Copy Settings (Registration)

I I I I I If you want to print from a Remote printing copier, either DP-3510, DP-4510 or DP-6010 that is
installed on a network with a different subnet mask, the Station (Machine Name) will not be
displayed for selection in the Touch Panel. You must first register the DP-3510, DP-4510 or DP-
6010 before being able to use the Tandem/Remote Copying function explained on Page 20.
(Please consult with your Network Administrator for details on the network address.)
The Key Operator ID code will be required when regitering a machine for selection.
1
2
3
4
5
6
7
22
(1) Press the FUNCTION Key on the
Control Panel.
(2) Select the COPIER SETTINGS in
the Function Setting mode.
Scroll to screen 04/04 and select 19
Key operator mode button.
Input the 4-digit ID Code and Touch the
OK button.
Scroll to screen 05/05 and select 20
Add new tandem desti.
Enter the IP Address by using the
Keypad and then touch the OK button.
Ex: 123.123.012.001
NOTE: When entering a one or two
digit address, add "00" or "0"
in front of the numerical
address.
Then enter the machine name by using
the QWERTY keyboard then touch the
OK button.
(Up to 15 characters)
Ex: DP-6010 SALES
Then enter the key name (up to 15 characters).
(By default, the key name will be up to
15 characters of the station's name. If
you do not want to change it, touch the
OK button.)