Remote Copy - Panasonic Workio DP-190 Operating Instructions Manual

Network Scanner

Remote Copy

■ Remote Copy
Scanned image data can be printed on other Printers through
the PC(s) connected on the network.
The Remote Copy Utility is installed on your PC as part of the
Panasonic-DMS software.
This utility allows you to copy documents Scanned on the
DP-190 and have them printed on any printer.
With the DP-190's Color Scanning capabilities, this allows you
to Remote Copy color documents.
When receiving a print file from the DP-190, the Remote Copy
Utility selects the printer configured on your PC and starts
printing the file with the preset properties.
NOTE:
1. Your PC will select the default printer if another printer was
not pre-configured for the utility after the Panasonic-DMS
software installation.
2. Make sure that your PC is logged in when using this feature,
or the print file will not transfer to the remote printer.
1. Scan
DP-190
(i.e. Scan in Color mode)
52
Your Network
2. Send to Your PC
Your PC
Your Pre-configured
Printer (i.e. Color Printer)
3. Print
1
or
5
SELECT DESTINATION
LTR
Select scanning
mode
● Resolution,
Select
Contrast,
Scanning Size
Density (Color
(LGL and MIX:
Scanning) only
with ADF only)
(See page 46).
LTR
INV
INV
LGL
MIX