Makita TD0101 Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Hammer Case Section
DISASSEMBLING
(1) Remove Hammer case section from the machine as illustrated in Figs. 2, 3.
Fig. 2
Groove of Hammer case for
accepting the hook of
Hammer case cover
Degrooving the hooks of Hammer case cover from the groove of Hammer
case complete, slide Hammer case cover toward Bit sleeve side.
Hammer case cover can be removed from Hammer case complete.
Fig. 3
Remove Carbon brush and then,
disassemble Housing set (R) by
unscrewig 3x16 Tapping screws.
3x16 Tapping screw
(8pcs.)
Carbon
brush
Housing set (L)
Remove bumper.
Bit sleeve
hook
Hammer
case cover
Remove Motor and Hammer
section in a set from Housing
set (L).
Hammer case section
Hammer case
section
Motor
section
Housing set (L)
Bumper
Hammer
case cover
Separate Hammer case section
from Motor section.
Motor section
P 3/ 14