Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. TD0101
  6. Technical information

Makita TD0101 Technical Information

Hide thumbs Also See for TD0101:

Advertisement

Quick Links

Download this manual See also: Instruction Manual
T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Models TD0101 and TD0101F are cost-competitive
100N.m-class impact driver developed as the entry model
of Makita impact driver series.
Its main features are:
Compact design with an overall length of 184mm (7-1/4")
Lightweight at only 0.99kg (2.2lbs)
The only difference between TD0101 and TD0101F is:
TD0101: Without LED job light
TD0101F: With LED job light
S
pecification
Voltage (V)
110
120
220
230
240
Specifications
No load speed: min
Impacts per min.: min-
Driving shank: mm (")
Machine screw
Standard bolt
Capacities
High tensile bolt
Coarse thread screw
Max. fastening torque*: N.m [kgf.cm] (in.lbs)
Electric brake
Variable speed control by trigger
Reverse switch
LED job light
Protection against electric shock
Power supply cord: m (ft)
Net weight: kg (lbs)
Weight according EPTA-Procedure 01/2003: kg
*torque at 3 seconds after seating when fastening M12 high tensile bolt
S
tandard equipment
Phillips bit ......................... 1 pc
Note: The standard equipment for the tool shown above may differ by country.
O
ptional accessories
Phillips bits, Square bits, Socket bits, Drill chucks, Hex shank auger bits,
Bit piece, Adjustable locator
TD0101, TD0101F
Impact Driver
Current (A)
Cycle (Hz)
2.2
50/60
1.7
50/60
1.1
50/60
1.0
50/60
1.0
50/60
Model
= rpm
-1
=ipm
1
Continuous Rating (W)
Input
230
---
230
230
230
TD0101/ TD0101F
0 - 3,600
0 - 3,200
6.35 (1/4) Hex
M4 - M8 (5/32 - 5/16")
M5 - M14 (3/16 - 9/16")
M5 - M10 (3/16 - 3/8")
22 - 90mm (7/8 - 3-1/2")
100 [1,020] (885)
No
Yes
Yes
No/ Yes
Double insulation
Australia, New Zealand, Brazil, Chile: 2.0 (6.6)
Other countries: 2.5 (8.2)
0.99
(2.2)
0.99
PRODUCT
L
W
Dimensions: mm (")
TD0101, TD0101F
Length (L)
184 (7-1/4)
Width (W)
67 (2-5/8)
Height (H)
192 (7-9/16)
Max. Output (W)
Output
90
140
90
140
90
140
90
140
90
140
P 1/ 14
H

Advertisement

loading

Related Manuals for Makita TD0101

Summary of Contents for Makita TD0101

  • Page 1 Its main features are: Compact design with an overall length of 184mm (7-1/4") Lightweight at only 0.99kg (2.2lbs) Dimensions: mm (") The only difference between TD0101 and TD0101F is: TD0101, TD0101F TD0101: Without LED job light TD0101F: With LED job light...

  • Page 2: Necessary Repairing Tools

    Disassembling / Assembling Ring spring 10 134844-7 Socket 27-50 Disassembling Hammer case complete [2] LUBRICATIONS Apply Makita grease FA.No.2 to the following portions designated with the black triangle to protect parts and product from unusual abrasion. Item No. Description Portion to lubricate...
  • Page 3 P 3/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Hammer Case Section DISASSEMBLING (1) Remove Hammer case section from the machine as illustrated in Figs. 2, 3. Fig. 2 Bumper Hammer Remove bumper. case cover Bit sleeve Groove of Hammer case for accepting the hook of Hammer case cover hook...
  • Page 4 P 4/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Hammer Case Complete DISASSEMBLING (2) The removed Hammer case section is disassembled as illustrated in Fig. 4. Fig. 4 Attach 134847-1 and 1R224 to 1R223, and fit 134847-1 to the hex portion of Hold the flat portion of Hammer Bearing box.
  • Page 5 P 5/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Hammer Case Complete ASSEMBLING (2) Set the assembled Hammer case complete in the same position as disassembling. And assemble as illustrated in Fig 6. Fig 6 Assemble Hammer case complete by turning Bearing box counter clockwise. The fastening torque is 25 - 30 N.m.
  • Page 6 P 6/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-2. Anvil and Bit holding Mechanism DISASSEMBLING (1) Remove Hammer case section as illustrated in Figs. 2 and 3. (2) Remove Bearing box, Internal gear 43 and Hammer section from Hammer case complete as illustrated in Fig. 4. Fig.
  • Page 7 P 7/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-3. Hammer Section DISASSEMBLING (1) Disassemble Hammer case section from the machine. (Figs. 2 and 3) (2) Remove Hammer from Hammer case complete. (Fig. 4) (3) Disassemble Hammer section as illustrated in Figs. 11 to 14. Fig.
  • Page 8 P 8/ 14 epair [3] DISASSEMBLY/ASSEMBLY [3]-3. Hammer Section (cont.) Fig. 15 ASSEMBLING Hammer Take the disassembling step in reverse. Note: Make sure that the place equivalent to one piece of Steel ball 3 has to be in Hammer when all 24 pieces of the place equivalent Steel ball 3 are set in place.

  • Page 9: Circuit Diagram

    Fig. D-1 Color index of lead wires' sheath Black Orange Blue Brown Purple Clear White TD0101 (220V to 240V) (110V to 127V) Housing set Housing set Housing set Housing set (left side) (right side) (left side) (right side)

  • Page 10: Wiring Diagram

    P 10/ 14 iring diagram Fig. D-2 TD0101 Wiring around Holder arm Wiring of Lead wire (orange) Guide Field lead wires (purple, orange) of left Brush holder and inside the rib of Holder arm to avoid Field lead wire (white)
  • Page 11 P 11/ 14 ircuit diagram Fig. D-3 Color index of lead wires' sheath Black Orange Blue Brown Purple Clear White TD0101F (Argentina, Chile etc. 220-240V area (220-240V area except Argentina and Chile where Noise suppression is required.) etc. where Noise suppression is required.) Housing set Housing set Housing set...
  • Page 12 P 12/ 14 iring diagram Fig. D-4 TD0101F Argentine, Chile etc. 220-240V area where Noise suppression is required Wiring around Holder arm Wiring of Lead wire (orange) Guide Field lead wires (purple, orange) of left Brush holder and inside the Rib of Holder arm to avoid Field lead wire (white) pinching between Housing set (R) and Holder arm.
  • Page 13 P 13/ 14 ircuit diagram Fig. D-5 Color index of lead wires' sheath Black Orange Blue Brown Purple Clear White TD0101F 110V for UK 110-127V area except UK110V Housing set Housing set Housing set Housing set (left side) (right side) (left side) (right side) Brush holder...
  • Page 14 P 14/ 14 iring diagram Fig. D-6 TD0101F 110V for UK Wiring around Holder arm Wiring of Lead wire (orange) Guide Field lead wires (purple, orange) of left Brush holder and inside the rib of Holder arm to avoid Field lead wire (white) pinching between Housing set (R) and Holder arm.

This manual is also suitable for:

Td0101f