Wiring Diagram - Makita TD0101 Technical Information

W
iring diagram
Fig. D-2
Wiring around Holder arm
Guide Field lead wires (purple, orange)
inside the rib of Holder arm to avoid
pinching between Housing set (R) and
Holder arm.
Holder arm
rib of
Holder arm
Wiring of Field
lead wires
Fix Field lead wires (red, clear)
with lead wire holders on Switch.
** Noise
suppressor
Wiring of Power supply
cord's Lead wires
Guide the Lead wires of
power supply cord between
Ribs.
** Line filter
** Noise suppressor and Line filter are
not used for some countries.
Housing set (L)
Switch
Rib
Rib
TD0101
Guide field Lead wire (white)
between lead wire holder and ribs.
Guide Lead wire (orange)
of left brush holder by Ribs.
Wiring of Noise suppressor's
Rib
Guide the Lead wires of Noise suppressor
between Ribs.
* Lead wire (black)
Rib * Lead wire (clear)
* Lead wire (white) for Low voltage
Power supply cord
Wiring of Lead wire (orange)
of left Brush holder and
Field lead wire (white)
Field lead
wire (white)
Lead wire (orange)
rib
of left Brush holder
Lead wires
for High voltage
P 10/ 14
lead wire
holder on
Switch