Replacing The Power Adapter Bracket - Lenovo ThinkCentre M600 User Manual

Hide thumbs Also See for ThinkCentre M600:
Table of Contents

Advertisement

7. Install the screw to secure the external battery box on the VESA mount bracket.
Figure 33. Installing the external battery box screw
8. Connect the external battery box cable to a USB connector on the computer. See "Rear view" on page 3.

Replacing the power adapter bracket

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii.
Note: The power adapter bracket is installed on the Video Electronics Standards Association (VESA) mount
bracket.
To replace the power adapter bracket, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
74
ThinkCentre M600 User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents