Jenn-Air SVD8310S Use And Care Manual page 27

7. Push ENTER buttonto enter stoptime.
The IndicatorWord AUTO willblinkin the Display. When starttime is reached,the
Indicator W ordAUTO willremainin Display. The OVEN indicator lightwillglowuntil
the desiredtemperatureis reached. When stoptimeis reached,the oven shutsoff
and the IndicatorWord AUTO wili beginto biinkand timer will beep. Beepingwill
continueevery 10 secondsfor 15 minutesunlessthe CANCEL button is pushed
twice.
To cheek START TIME before cooking begins
Hold in START TIME button until the wordsSTART TIME appear in the Display. The
start time will be displayedbriefly,then Displaywillreturn to time of day.
To change START TIME before cooking begins
1. Hold in START TIME button untilthe wordsSTART TIME appear in the Display.
2. Turn SET dial to desired time.
3. Push ENTER button twice to enter new start time and stop time previously
programmed.
To check STOP TIME
Hold in STOP TIME buttonuntilthe wordsSTOP TIME appear inthe Display. The stop
time will be displayedbriefly, then Display willreturn to on-going program.
To change STOP TIME
1. Hold in STOP TIME buttonuntil the words STOP TIME appear in the Display.
2. Tum SET dial to desiredtime.
3. Push ENTER buttonto enter stoptime.
To Cancel function programmed
Push CANCEL button twiceto cancel function,duringprogrammedtime or after time
has expired.
IMPORTANT
• After clock-controlled baking, turn OVEN and TEMP knobsto Off position.
• Sincefoodcontinues to osok if left inthe oven,it issuggested thattheclockcontrols
be usedprimarilytostarttheoven when no oneis inthe kitchen. Provisions should
be madeto have the food removedas soon as the signal has sounded.
• If morethan 7 secondselapses between holdingin START TIME buttonor STOP
TIME buttonand turningthe SET dial,the Displaywill automaticallyratum to on-
going program.
• If morethan 1 minuteelapsesbetween turningSET dialto a newtimeand entering
new START TIME and STOP TIME, the entire program will be cancelled and
Displaywill returnto time of day clock.
27