Double-Active Calc System; Using The Calc-Clean Function - Philips GC4400 serie Directions For Use Manual

Hide thumbs Also See for GC4400 serie:
Table of Contents

Advertisement

Available languages

Available languages

To keep the soleplate smooth, avoid hard contact with metal objects.
Never use a scouring pad, vinegar or other chemicals to clean the
soleplate.
2
Clean the upper part of the iron with a damp cloth.
3
Regularly rinse the water tank with water. Empty the water tank
after you have rinsed it.

Double-active Calc system

The Double-Active Calc System consists of an Anti-Calc tablet inside the
water tank combined with the Calc-Clean function.
1
The Anti-Calc tablet prevents scale from clogging the steam vents.
This tablet is constantly active and does not need to be replaced.
2
The Calc-Clean function removes the scale particles from the iron.

Using the Calc-Clean function

Use the Calc-Clean function once every two weeks. If the water in your
area is very hard (i.e. when flakes come out of the soleplate during
ironing), use the Calc-Clean function more frequently.
1
Make sure the appliance is unplugged.
2
Set the steam control to position 0.
3
Fill the water tank to the maximum level.
Do not put vinegar or other descaling agents in the water tank.
4
Set the temperature dial to MAX (Fig. 14).
5
Put the plug in an earthed wall socket.
6
Unplug the iron when the temperature light goes out.
7
Hold the iron over the sink, press and hold the Calc-Clean button
and gently shake the iron to and fro (Fig. 15).
Steam and boiling water come out of the soleplate. Impurities and
,
flakes (if any) are flushed out.
8
Release the Calc-Clean button as soon as all the water in the tank
has been used up.
4239.000.6220.5.indd 13
EnGlish
13
23-10-09 10:09

Advertisement

Table of Contents
loading

Table of Contents