Makita LS0814 Instruction Manual page 28

1
3
1. Workpiece
2. Cutting line
3. Holder assembly
1
2
1. Vertical vise
2. Holder assembly
28
Adjusting the position of laser line
For model LS0814FL only
006988
WARNING:
• As the tool is plugged when adjusting the position of laser line, take a full
caution especially at switch action. Pulling the switch trigger accidentally
cause an accidental start of the tool and personal injury.
CAUTION:
2
• Never look into the laser beam directly. Direct laser beam causes
damage to your eyes.
• Never apply a blow or impact to the tool. A blow or impact causes the
incorrect position of laser line, damage to the laser beam emitting part or
a short life of the tool.
006989
When adjusting the laser line appears on the left side of the saw blade
1
1. Screw to change the movable
range of the adjusting screw
3. Adjusting screw
5. Saw blade
When adjusting the laser line appears on the right side of the saw blade
1. Laser line
3. Screw to change the movable
range of the adjusting screw
3
5
4
2
2. Hex wrench
4. Laser line
1
2
3
2. Saw blade
006991
006990