Makita LS0814 Instruction Manual page 27

1
2
1. Pointer
2. Screw
1
1. Right 45° bevel angle adjusting
bolt
2. Left 45° bevel angle adjusting bolt
006985
(2)
006986
2
006987
Make sure that the pointer on the arm point to 0° on the bevel scale
on the arm holder. If it does not point to 0°, loosen the screw which
secures the pointer and adjust the pointer so that it will point to 0°.
45° bevel angle
Adjust the 45° bevel angle only after performing 0° bevel angle
adjustment. To adjust left 45° bevel angle, loosen the lever and tilt
the blade to the left 45° bevel angle. Turn clockwise the left 45°
bevel angle adjusting bolt on the right side of the arm holder two or
three revolutions. Carefully set the side of blade with the top sur-
face of turn table at 45° bevel angle using the triangular rule by
turning the left 45° bevel angle adjusting bolt.
Adjust right 45° bevel angle this way.
27