Cisco UCS C240 M4 Installation And Service Manual page 161

Appendix D GPU Card Installation
Return the securing plate to the riser. Insert the two hinge-tabs into the two slots on the riser, and
c.
then swing the securing plate closed.
d. Tighten the single thumbscrew that holds the securing plate.
Close the card-tab retainer (see
e.
Position the PCIe riser over its socket on the motherboard and over its alignment features in the
f.
chassis (see
g. Carefully push down on both ends of the PCIe riser to fully engage its circuit board connector with
the socket on the motherboard.
Step 6 Replace the top cover.
Step 7 Replace the server in the rack, replace cables, and then power on the server by pressing the Power button.
Step 8 Continue with
OL-32474-01
Figure
Figure 3-26).
Installing Drivers to Support the NVIDIA GPU Cards, page
3-28).
Cisco UCS C240 M4 Server Installation and Service Guide
D-31.
D-5