Cisco UCS C240 M4 Installation And Service Manual page 154

Embedded SATA RAID Controller
/<OS>/Storage/Intel/C600/
Copy the dud-<
c.
Start the Linux driver installation using one of the following methods:
Step 4
To install from local media, connect an external USB DVD drive to the server and then insert the
•
first RHEL install disc into the drive. Skip to
To install from remote ISO, log in to the server's Cisco IMC interface and continue with the next
•
step.
Launch a Virtual KVM console window and click the Virtual Media tab.
Step 5
Click Add Image and browse to select your remote RHEL installation ISO file.
a.
Click Add Image again and browse to select your dud.img file.
b.
Check the check box in the Mapped column for the media that you just added, and then wait for
c.
mapping to complete.
Power cycle the server.
Step 6
Press F6 when you see the F6 prompt during bootup. The Boot Menu window opens.
Step 7
On the Boot Manager window, select the physical disk or virtual DVD and press Enter. The SLES
Step 8
installation begins when the image is booted.
When the first SLES screen appears, choose Installation.
Step 9
Enter one of the following in the Boot Options field:
Step 10
For SLES 11 and SLES 11 SP1 (32- and 64-bit), enter: brokenmodules=ahci
•
For SLES 11 SP2 (32-and 64-bit), enter: brokenmodules=ahci brokenmodules=isci
•
For SLES 12, enter: brokenmodules=ahci
•
Step 11 Press F6 for the driver and choose Yes.
Step 12 Do one of the following actions:
• If you prepared the IMG file on a physical disk in
server and then insert the disk in the A:/ drive and press Enter.
• If you mapped the IMG file as a virtual floppy in
"Yes" appears under the F6 Driver heading.
Step 13 Press Enter to choose Installation.
Step 14 Press OK.
The following message is displayed:
At the menu, choose the driver update medium and press the Back button.
Step 15
Continue and complete the installation process by following the prompts in the installation wizard.
Step 16
Cisco UCS C240 M4 Server Installation and Service Guide
C-22
>.img file to a temporary location on your workstation.
driver version
LSI Soft RAID Driver Updates added.
Appendix C
Step 6.
Step 2, insert the USB thumb drive to the target
Step 5, choose the location of the virtual floppy.
RAID Controller Considerations
OL-32474-01