Supported Raid Controllers And Required Cables - Cisco UCS C240 M4 Installation And Service Manual

Hide thumbs Also See for UCS C240 M4:
Table of Contents

Advertisement

Supported RAID Controllers and Required Cables

Supported RAID Controllers and Required Cables
This server supports the RAID controllers and cable requirements shown in
Caution
In a SFF 8-drive server, do not use the embedded software RAID controller and a hardware RAID
controller card to control the front-facing drives at the same time. This combination is not supported and
could result in data loss. You can use the embedded software RAID controller to control internal SAS SSD
boot drives (SFF 24-drive and LFF 12-drive server versions only) while you use a hardware RAID
controller card to control the front-facing drives.
Note
See
controller support by server version and drive type.
Table C-1
Cisco UCS C240 M4 RAID Options
Controller
Style
Embedded RAID
On
(PCH SATA)
board
Cisco UCS 12G SAS
PCIe
Modular RAID
Controller
This controller can be
ordered with modular
flash-based write
cache (FBWC)
options: 1 GB, 2 GB,
or 4 GB.
Cisco UCS 12G SAS
PCIe
Modular HBA
Note: See also
Write-Cache Policy
for Cisco 12G SAS
Modular RAID
Controller, page
C-3.
Cisco UCS SAS
PCIe
9300-8e HBA
Note: See also
Cisco
UCS SAS 9300-8e
HBA Considerations,
page
C-4.
1. Embedded RAID 5 support requires an optional RAID 5 key module.
2. SCPM = SuperCap power module (RAID backup unit). See
Cisco UCS C240 M4 Server Installation and Service Guide
C-2
Support Matrix For Cisco UCS C240 M4 Server RAID Controllers, page C-4
Supported Server Version/
Maximum Front-Facing Drives
Controlled
SFF 8-drives/no expander:
8 internal SATA drives
SFF 8-drives/no expander:
8 internal drives
SFF 16-drives/expander:
16 internal drives
SFF 24-drives/expander:
24 internal drives
LFF 12-drives/expander:
12 internal drives
SFF 8-drives/no expander:
8 internal drives
SFF 16-drives/expander:
16 internal drives
SFF 24-drives/expander:
24 internal drives
LFF 12-drives/expander:
12 internal drives
All server versions
8 external SAS+SATA
ports, controlling up to
1024 non-RAID external
drives
RAID Backup Units, page
Appendix C
SCPM RAID Levels
1
No
0, 1, 5
, 10
2
Yes
Variable by cache
size:
No cache:
0, 1, 10
1GB, 2GB, or
4GB cache:
0, 1, 5, 6, 10, 50,
60
No
Non-RAID
No
Non-RAID
C-6.
RAID Controller Considerations
Table
C-1.
for information about
Required Cables
SFF 8-drives/no expander:
Cable and required SATA
interposer board bundled as
UCSC-IP-PCH-C240M4=
SFF 8-drives/no expander:
(
)
UCS-240CBLMR8=
SFF 16 drives/expander:
(
)
UCS-240CBLMR16=
SFF 24 drives/expander:
(
)
UCS-240CBLMR24=
LFF 12 drives/expander:
(
)
UCS-240CBLMR12=
SFF 8-drives/no expander:
(
)
UCS-240CBLMR8=
SFF 16 drives/expander:
(
)
UCS-240CBLMR16=
SFF 24 drives/expander:
(
)
UCS-240CBLMR24=
LFF 12 drives/expander:
(
)
UCS-240CBLMR12=
External storage cables are
not sold by Cisco.
NOTE: This HBA does not
support optical cables for
connection to external storage
(copper only).
OL-32474-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents