Installation Steps, Overview - Fujitsu PRIMERGY TX1330 M2 Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter
Ê Transport the server to the place where you want to set it up.
Ê Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that all necessary manuals (see
page 10) are available; print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. Install these in the server as described in the supplied
documentation.
Ê Set up the floorstand model (see section
on page 47) or install the rack model in the rack (see section
"Installing/removing the rack model" on page
Ê Wire the server. Follow the instructions in sections
the server" on page 50
page 54.
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
Ê Configure the server and install the desired operating system and
applications. The following options are available:
– Remote installation with the ServerView Installation Manager:
With the ServerView Suite DVD provided, you can configure the server
and install the operating system in a convenient manner.
TX1330 M2
"Important information" on page
"Unpacking the server" on page
and "Notes on connecting/disconnecting cables" on
51).
"Control elements and indicators" on page
Operating Manual
31.
"Documentation overview" on
"Setting up the floorstand model"
48).
"Connecting devices to
"Connecting the server to the
46).
60).
29