Preset Station Menu - Chevrolet 2006 Corvette Navigation Manual

Preset Station Menu

Up to 30 stations, 6 AM, 6 FM1, 6 FM2, 6 XM1, and
6 XM2, if equipped, can be programmed for home and
for away (XM does not have the home and away
feature). To store presets, do the following:
1. Turn the audio system on.
2. Press the SRCE hard key.
3. Touch AM, FM1, FM2, XM1, or XM2, if equipped, to
display the desired source. The preset station menu
will appear.
4. Tune to the desired station by using the
TUNE/SEEK arrows.
5. Touch SOUND to set the bass, mid-range, treble,
and Auto Tone Control (ATC) for your preset, if
desired. See "Sound Menu" later in this section for
more information.
6. Touch and hold one of the six numbered preset
screen buttons for more than two seconds until
you hear a beep.
7. Repeat the steps for each preset and source.
SCAN: To scan stations, touch SCAN. The radio will go
to a station, play for a few seconds, then go on to the
next station. Touch SCAN again to stop scanning.
To scan preset stations, touch and hold SCAN for
two seconds. It will only scan the audio source it is in,
with the exception of FM 1 and FM 2, which will both
be scanned if in that source. Touch SCAN again to
stop scanning.
RDS (Radio Data System): See "Radio Data System
(RDS)" later in this section for more information.
Info (Information): See "Radio Data System (RDS)"
later in this section for more information.
AutoSet: Touch this screen button to replace currently
stored preset stations with the strongest stations
available in the immediate area. Touch it again to return
to the original preset stations.
SOUND: See "Sound Menu" following in this section for
more information.
3-7