Chevrolet 2006 Corvette Navigation Manual page 102

Enter Destination: This command will cause the
system to add the current marked point as the final
destination. This command is used after the following
commands have been used: Home, Go to Starting Point,
Go to Previous Destination.
Guidance Commands
Repeat Guidance, Repeat Voice: These commands
will cause the system to repeat the last available
voice prompt guidance command if a destination has
been set.
Louder: This command will cause the system to
increase the volume of the navigation voice prompts.
Softer: This command will cause the system to
decrease the volume of the navigation voice prompts.
Voice Guidance Off: This command will cause the
system to turn off the navigation voice prompts if
a destination has been set.
Voice Guidance On: This command will cause the
system to turn on the navigation voice prompts.
[Change to] Arrow (Guide/Guidance): These
commands will cause the system to change to Arrow
Guidance screen view in the Guidance Menu if a
destination has been set.
4-6
[Change to] Turn List (Guide/Guidance): These
commands will cause the system to change to Turn List
Guidance screen view in the Guidance Menu if a
destination has been set.
[Change to] Freeway (Guide/Guidance): These
commands will cause the system to change to
Freeway Guidance screen view in the Guidance Menu
if a destination has been set. This command is only
available if you are on a freeway.
[Change to] Intersection (Guide/Guidance):
These commands will cause the system to change to
Intersection Guidance screen view in the Guidance
Menu if a destination has been set. This command is
only available when the next turn is less than 0.5 mile
(800 m) away for city streets and 2 miles (2 km) away
for freeways.
Entire Route, Entire Rout Map, Route Overview:
These commands will cause the system to display the
entire route if a destination has been set.
Reroute: This command will cause the system to
generate an alternate route to a set destination while on
a planned route.
Detour, Detour Entire Route: These commands will
cause the system to activate the detour feature
when driving a planned route.