Configure Menu - Chevrolet Cruze Infotainment system User Manual

Start Guidance: Press to start
route calculation to the
destination(s) received.
Show on Map: Press to display the
Map Screen.
Call: Press to initiate a call with
Bluetooth Phone (if available) or
OnStar Hands-Free Calling (if
available).
Save as Home: Press to set an
address as a home destination.
Save: Press to save the
downloaded destination to the
address book.
Route Guidance Active
If an OnStar destination is
downloaded while route guidance is
already active, the system displays
a pop-up screen with the following
screen function:
Press Start Guidance; the
navigation system adds the
downloaded destination before
the next waypoint of the existing
route (closest to the current
vehicle position).
All other buttons on the pop-up
screen operate as described
under Route Guidance Not
Active.
Previous Destinations
Previously downloaded OnStar
destinations are saved under
Previous Destinations in the
navigation system, where they can
be accessed or saved to the
Address Book.

Configure Menu

The Configuration Menu is used to
adjust features and preferences,
such as Sound, Radio, Nav
(Navigation), Display, or Time
Settings.
Infotainment System
1. Press the Config screen button
on the Home Page or press the
CONFIG button on the faceplate.
2. Press the scroll bar until the
desired option displays. Select
the desired settings to change.
See the owner manual for
information on adjusting most
vehicle settings. See Navigation
Settings and Navigation
Settings Button later in this
section.
61