Chevrolet 2006 Corvette Navigation Manual page 10

7. Enter the street name using the alpha keypad on
the screen.
Do not enter directional information or street type,
and use the space symbol screen button (
between street or city names. For example, the
street name N. Royal Oak Rd. should be entered as
U
royal oak. Use the backspace (
button if an incorrect character has been entered.
8. Select the desired street name with the correct
designation (Dr., Ln., St., etc.) from the list.
9. If there is more than one city, the system will
display the list of cities that have a street with
that name. Select a city from the list or select the
Input Name screen button to input the city name.
10. Enter the house number using the numeric keypad
on the screen and touch the OK screen button.
A map screen will appear with the destination
marked.
h
11. Select the (destination) symbol screen button.
12. Select the Guide screen button.
13. Once you begin driving you will hear an audio
prompt to "Proceed to the highlighted route."
You are now in route guidance mode.
See "Address" under Enter Destination on page 2-11 for
more information.
1-8
Entering a Point of Interest (POI)
To set a destination by entering a Point of
Interest (POI), do the following:
U
)
1. Press the power/volume knob to turn the
2. Insert the DVD map disc. See "Installing the Map
V
) screen
3. A notice may appear. Touch the Agree screen
4. Press the MENU screen button.
5. Press the
6. Press the
7. Enter the specific title of the POI in the Name space
8. Select the POI from the list.
9. If there is more than one city, the system will
system on.
DVD" under Maps on page 2-3 for more information.
button to proceed.
If the radio is already on with a map disc inserted,
press the NAV hard key.
<
Enter Destination screen button. Verify
that the selected Region is correct.
K
Point of Interest screen button.
(i.e. Washington Monument) using the alpha
keypad on the screen.
display the list of cities that have a street with
that name. Select a city from the list or select the
Input Name screen button to input the city name.
A map screen will appear with the destination
marked.