Chevrolet 2006 Corvette Navigation Manual page 98

Voice Recognition
The navigation system's voice recognition allows for
hands-free operation of navigation and audio system
features. Voice recognition can be used when the
ignition is on or in ACC or when Retained Accessory
Power (RAP) is active.
This feature only works if the map DVD is inserted.
If you try to use voice recognition without the map DVD
inserted, the system will display "Please insert the
navigation map DVD to use the voice recognition
feature."
To use voice recognition, do the following:
2. Clearly state one of the commands listed on the
following pages. For example, say "FM1."
3. The system will tell you the command being
implemented. For example, the system will
say "FM1 Radio" and change the audio system to
the FM1 source.
4-2
1. Press this talk symbol
hard key and release it
when you hear a beep.
The audio system, if on,
will mute.
You may end voice recognition by not speaking any
commands. After about five seconds of silence,
the system will automatically cancel voice recognition.
At times, the system may not understand a spoken
command. If this happens, try again. If a spoken
command is not available, the system will provide
feedback based on availability.
While using voice recognition, make sure to keep
interior noise levels to a minimum. Otherwise, the
system might not recognize voice commands.
The system will only recognize commands spoken
in English.
Voice Recognition Commands
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. Any words shown in square
brackets are optional. If there are words shown in
parentheses, choose one of the options. To use
the voice commands, refer to the instructions listed
previously.