Multi-Projection Function
(7)
Select the sections of the images.
s "Displaying a Scaled Image"
Adjusting manually offline
Adjust the images from all projectors manually.
Advance preparation
(1)
Turn on all projectors.
(2)
Set an ID for all projectors and the remote controls.
s "Set the projector ID"
p.40
Adjusting the projected position
(1)
Adjust the position (angle) of the projector.
s "Installation Settings"
p.29
(2)
Adjust the arrangement of the images.
s "Performing tiling manually"
Adjusting the projected images
"Adjusting the projected images"
s
Tiling
Project the same image from multiple projectors to create one large image.
You can project by using up to nine projectors.
p.102
p.93
p.90
a
Before performing tiling, adjust the projected image so that it is a
rectangle. Also, adjust the size and focus of the images.
s "Adjusting the Image Size"
s "Correcting the Focus"
Performing tiling automatically
This section explains how to select the projector being used in Projector
Grouping, and then automatically configure the images being projected.
a
Location Setup is performed using the camera built into the front of
the projector. Do not block the camera or the projected images.
a
Press the [Menu] button while projecting.
b
Select Multi-Projection from Extended, and then press the [
button.
c
Select Projector Grouping, and then press the [
p.35
p.36
] button.
91
]