Switching To The Target Image By Remote Control; Adjusting The Volume - Epson EB-L1505U User Manual

Projecting Images

Switching to the Target Image by Remote Control

• Press the button of the input source that you want to project.
The input ports for the buttons are shown below.
D
Changes to images from a computer connected via the network.
E
For EB-L1505U/EB-L1500U/EB-L1405U only
Remote control
Input Port
• Press the [
] button.
Select the input source to be projected, and then press the [

Adjusting the Volume

You can adjust the volume using one of the following methods.
Remote control
60
] button.