KitchenAid KOST100ESS Technical Education page 43

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
REMOVING THE DOOR LATCH AND OVEN
LIGHT SWITCH ASSEMBLY
Open the oven door to expose the vent trim
located below the Control Panel.
Remove four mounting screws and remove the
vent.
Locate and remove two Latch Assembly mounting
screws at the front of the assembly.
Must clear mounting tab
Picture shown with the Appliance Manager
mounting support removed for clarity
Push the Latch Assembly back and up to release it
from a mounting tab at the back.
Once removed from the tab, pull the assembly out
the front.
Built-In Single and Double Wall Ovens
COMPONENT ACCESS
n
4-9