Porsche Boxster Technical Manual page 74

Boxster (986)
Body front
2
3
Plug-welding front floor panel to the bulk-
head under shielding gas
Plug-welding the front floor panel to the side
members under shielding gas
Spot-welding the closing panel
4
Spot-welding the closing panel to the front
floor panel
Plug-weld the front floor panel to the bulkhead -F- under
shielding gas.
Align the front floor panel with the side members on the
left and right -E- and plug-weld under shielding gas.
Spot-weld the closing panel to the front floor panel -C- and
the side members on the left and right -A, B-.
Spot-weld the closing panels with to wheel housings on the
left and right -D-.
Tools and materials
2
Basic straightening attachments for 911 Carrera (996)
Nr. 7250700
Star gauges Nr. 127-1
3
Shielding-gas welding device
4
Multispot spotwelder
5
Pneumatic body saw
6
Angle grinder
7
Oscillating body saw (special electrical cutter)
8
Multispot spotweld cutter
9
Hole punch
10 Hot-air gun
11
Rotary brush
12
Spotweld cutter 07 mm, No. 129
~ Rep. Gr. 3; Workshop Equipment
Manual
~ Rep. Gr. 2.4; Workshop Equipment
Manual
~ Rep. Gr. 3; Workshop Equipment
Manual
~ Rep. Gr. 3; Workshop Equipment
Manual
~ Rep. Gr. 3; Workshop Equipment
Manual
~ Rep. Gr. 2.4; Workshop Equipment
Manual
~ Rep. Gr. 3; Workshop Equipment
Manual
~ Rep. Gr. 3; Workshop Equipment
Manual
~ Rep. Gr. 2.4; Workshop Equipment
Manual
~ Rep. Gr. 3; Workshop Equipment
Manual
~ Rep. Gr. 2.4; Workshop Equipment
Manual
~ Rep. Gr. 2.4; Workshop Equipment
Manual