Porsche Boxster Technical Manual page 185

Disassembling release for rear lid
No.
Procedure Instructions
1 Undoing hexagon socket head
bolts.
Remove plastic plugs and undo the M6 x 25 hexagon
socket head screws from the sill by approx. 4 -5 turns.
2
Removing sill cover.
Lift up sill cover from the lower support using a plastic spa-
tula and press out.
3
Undoing bowden cables. Undo the M4 x 14 hexagon socket head bolt of the bow-
den cable in the actuating lever. Press the bowden cable
sleeve out of the guide of the sill cover.
Press retainer SLB 6 out of the 6 x 22 x 19 pin. Remove
pin from the actuating lever and from the sill cover. Disen-
gage spring from the sill cover and pull the actuating lever
up and out of the sill cover.
4
Undoing actuating levers.
Undo T orx screws from the actuating element and pull out
of the support to the rear; disconnect electrical connection.
5
Undoing actuating element.
55 -17 55 57 37 Disassembling and assembling release for rear lid
Printed in Germany -10, 1997 986559