Porsche Boxster Technical Manual page 65

Boxster
Body front
Removing and installing the wing
Before removing the wing, it is necessary to remove the wheel, the wheel housing liner and the
carbon canister.
Attention:
Repose
N°
Designation
Nbre
Depose
1
Rubber sleeve
Pull off
1
Press in
2 Main headlight
(combination unit)
1
with a socket wrench (width
across flats 5), disengage
the main headlight and
remove it to the front.
3
Sliding piece
1
Pull off downwards
Insert the main headlight
into the guides of the
mounting plate and lock
it with the socket wrench
(width across flats 5)
Press in upwards
4
Plug connection Remove from the mounting
plate by turning
Pull oft
5 Vent hose 1
Attach
6
3
Undo
Fastening element
7
Mounting plate
1
Pull forwards and remove
from the headlight recess
Insert the mounting plate
into the holes provided
for that purpose and
press it back. Insert the
main headlight into the
mounting plate guides
and lock in place with the
socket wrench (width
across flats 5). Adjust
the mounting plate with
the headlight in accord-
ance with the wing con-
tours and tighten the
fastening elements.
8 Collar nut M6
5
9
Strut
10
Headlight cleaning element
5055 19 Removing and installing the wing
Printed in Germany -14, 1997
50 -7
986505