AEG VOXTEL D235 Quick Start Manual page 10

10
5.5
17
18
19
Note:
If the wireless headset is not registered, press and hold volume up / flash
key together with volume down key to initiate the registration mode.
5.6
Purple
Blue
AEG Voxtel D235_V3 A6 UK-DE-FR-NL-IT.indd 10
Overview of the wireless headset (see P4)
Power / talk on/off
• In idle mode: press and hold to power the wireless headset on
or off.
• During ringing: press to answer the call.
• During a call: press to end the call.
• During registration: press to exit the registration mode.
Volume up / flash
• During a call: press to increase the earpiece volume. Press and
hold to answer a second incoming call.
• During ringing: press to increase the ringer volume.
Volume down
• During a call: press to decrease the earpiece volume.
• During ringing: press to decrease the ringer volume.
Wireless headset LED indicators
• Steadily on: the wireless headset is unregistered.
• Flashing: the wireless headset is registered, but the base
is not available (searching or out of range).
• Steadily on: when the headset is seated in the base and
fully charged.
• Once the headset is successfully registered, the blue
light will flash on then off, for about three seconds at a
time, and emit a long beep.
• Single flashing: the wireless headset is in idle mode and
off the base.
• Double flashing: the wireless headset is on a call, and if
the signal becomes weak, double beeps will be heard.
• Continuously flashing: the wireless headset is ringing. A
ringing will also be heard in the earpiece.
6/08/2012 11:03:54