Table of Contents
Advertisement
12
www.aeg.com
For Duration
and then the hours, for End
set the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
and time setting flash in the display. The
oven stops.
4. Press any button to stop the acoustic
signal.
5. Turn the knob for the oven functions
to the off position.
If you press
the hours for DURATION
setting of the END
function.
6.3 Setting the MINUTE
MINDER
1. Press
and "00" flash in the display.
2. Press
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in
minutes and seconds. When the time
you set is longer than 60 minutes, the
symbol
7. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
7.1 Using the core
temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the
table for roasting.
• The core temperature. Refer to the
table for the core temperature sensor.
first you set the minutes
or
symbol
when you set
, the appliance goes to
.
or
to set the MINUTE
comes on in the display.
The appliance now calculates the time in
hours and minutes.
first you
3. The MINUTE MINDER starts
automatically after five seconds.
After 90% of the set time, an acoustic
signal sounds.
4. When the set time ends, an acoustic
signal sounds for two minutes.
"00:00" and
Press any button to stop the acoustic
signal.
6.4 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on
immediately when the oven starts to
heat.
To reset the Count Up Timer, press and
hold
up again.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the front of
flash in the display.
If you set the MINUTE
MINDER when the
DURATION
or END
function operates, the
symbol
comes on in the
display.
and
. The timer starts to count
The Count Up Timer cannot
be used with the functions:
Duration
, End
temperature sensor.
CAUTION!
Only use the core
temperature sensor supplied
with the appliance, or
genuine replacement parts.
, core
on the
Advertisement
Table of Contents
