The Pre Out Setting - Pioneer VSX-820-S/-K Operating Instructions Manual

The System Setup menu
2 Select 'Input Assign' from the System
Setup menu.
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
3 Select 'Component Input' from the
Input Assign menu.
3.Input Assign
a.Component Input
Return
4 Select the number of the component
video input to which you've connected
your video component.
The numbers correspond with the numbers
beside the inputs on the rear of the receiver.
5 Select the component that corresponds
with the one you connected to that input.
Select between BD, DVD, TV, DVR or OFF.
• Use / and ENTER to do this.
• If you assign a component input to a
certain function, any component inputs
previously assigned to that function will
automatically be switched off.
• Make sure you have connected the audio
from the component to the corresponding
inputs on the rear of the receiver.
6 When you're finished, press RETURN.
You return to the Input Assign menu.
• For the assignment of the digital signal
inputs, see Choosing the input signal on
page 41.
Return
3a.Component Input
Component–1 BD
Component–2 [ DVD ]
Return

The Pre Out Setting

Specify either using the surround back
speaker or the front height speaker
connection with the PRE OUT outputs. An
additional amplifier is required for the speaker
connection.
• Default setting: Surr. Back
1 Press on the remote control,
RECEIVER
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use /// and ENTER on the remote
control to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
2 Select 'Pre Out Setting' from the
System Setup menu.
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
Return
3 Select which speaker to connect to the
PRE OUT outputs using /.
• Surr. Back – Connect the surround back
speaker.
• Height – Connect the front height speaker.
4 When you're finished, press RETURN.
You return to the System Setup menu.
Return
4.Pre Out Setting
Pre Out Surr. Back
Return
06
47
En