The Pre Out Setting; The Input Assign Menu; The Video Parameter Setting; Video Converter - Pioneer VSX-S500-K Operating Instruction

The Home Menu

The Pre Out Setting

Specify either using the surround back speaker or the front
height speaker connection with the PRE OUT SURR BACK/
FRONT HEIGHT outputs. An additional amplifier is required
for the speaker connection.
• Default setting: Surr. Back
1
Select 'Pre Out Setting' from the Home Menu.
Home Menu
3.Pre Out Setting
1 . Auto MCACC Pre Out
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
2
Select which speaker to connect to the PRE OUT SURR
BACK/FRONT HEIGHT outputs using /.
• Surr. Back – Connect the surround back speaker.
• Height – Connect the front height speaker.
3
When you're finished, press RETURN.
You return to the Home Menu.

The Input Assign menu

The composite video input terminal is assigned to ANALOG
AUX under factory settings, but this can be changed to
DIGITAL AUX or CD input.
1
Select 'Input Assign' from the Home Menu.
Home Menu
Surr. Back
2
Select 'Composite Input' from the Input Assign menu.
Return
4.Input Assign
a.Composite Input
3
Select the desired input option for the composite video
input terminal.
Select between ANALOG AUX, DIGITAL AUX, CD or OFF.
• Use / and ENTER to do this.
• Make sure you have connected the audio from the
component to the corresponding inputs on the rear of the
receiver.
4
When you're finished, press RETURN.
You return to the Input Assign menu.
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
4a.Composite Input
I n p u t ANALOG AUX
Return Return

The Video Parameter setting

This receiver can up-convert the video signal input from the
composite video terminal; the output is from the HDMI OUT
terminal. The following shows the various settings for this
function.

Video Converter

This setting specifies valid/invalid for the function that
converts the input video signal from composite video
terminal. When OFF is selected, Resolution and Aspect can
not be set.
1
Select 'Video Parameter' from the Home Menu.
Home Menu
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
2
Select 'Video Converter' from the Video Parameter
menu.
5a.Video Converter
5.Video Parameter
a.Video Converter BD/BDR
DVD/DVR
b.Resolution
GAME
c.Aspect
STB
Return
3
Select the setting for converting each type of video
input.
• ON – The signal is output also to the HDMI OUT terminal.
• OFF – The signal input from the HDMI terminal of the
selected input function will be output from the HDMI OUT
terminal. The signal input from the analog composite
video will not be output from the HDMI OUT terminal.
4
When you're finished, press RETURN.
You return to the Video Parameter menu.
06
06
ON
[ OF F ]
[ OF F ]
[ OF F ]
Return
39
En