Time2 User Manual page 23

Once the camera has been detected by the software, you will
see the camera name and status.
By logging into WAN, the camera can be viewed using the
Ethernet (internet) cable or wirelessly.
If the camera fails to show in LAN, please log into the WAN
section using the details on back of the camera. These will show
the status of the camera.
To login to the camera via the
WAN settings, simply enter the
Camera ID and Username
(found at the back of the
camera).
Setting the camera up wirelessly
Firstly, ensure the Camera is online under the LAN Tab.
To set the camera up wirelessly, right click on the camera name
to bring up a list of options. Click on 'Configuring Network'
You will be required to fill in your WiFi Network details.
Click on 'Start WiFi Setting then click 'Scan' to look for local WiFi
Networks.
Select your home WiFi network from the list.
Then enter the Password for your internet router. Leave the
DHCP selected, this will automatically enter your IP Address into
the settings.
22