Setting Up Motion Detection - Time2 User Manual

Upon completion. Press Ok and the following window will appear.
It may take a few moments for the camera to connect to and may
also make a slight noise.
Settings up Motion Detection
Right click on the camera name and you will see a list of
options. (See image 1 below)
Click on Email alerts to set up the motion detect (See image 2)
Please note: The motion detect will send an email and up to 3
images with your specified message. Motion detection can only be
set up with Hotmail, Yahoo and Gmail email addresses.
1. Fill in the appropriate details (see image 3). Please be advised
the information for the SMTP Port and Data Encryption can be
found in image 4.
2. Upon completion, the motion detection will have been activated
and when the camera detects movement, it will automatically
send out an email alert. If for any reason you do not receive an
email. Please check your Sensitivity settings (See section 4)
Please Note: Some mail may go to your Junk folder! Please check
your junk folder and add the email address to your contact list to
avoid any issues.
11