Setting The Camera Up Wirelessly - Time2 User Manual

Setting the camera up wirelessly

To set the camera to run wirelessly, you will need to open the SYSM
Monitor software.
Under the LAN tab you will see the camera
name, this will show as blue. When viewing
the camera, this will then change to red as
shown.
To set up the WiFi, right click on the camera name to
bring up a list of options.
Click on 'Set WiFi Connection' on the list that
appears. Thereafter click on start WiFi settings
then 'scan for network', which would require your
Network name and Password.
(As shown below)
10