Connecting The Camera To The Software - Time2 User Manual

Connecting the camera to the software

To connect the camera with the software, open the
'SYSM Monitor' program. The desktop icon is called
SYSM Monitor.
When the camera is connected to the router, open the LAN
tab and the camera will automatically appear as shown
below:
The camera will appear
network, red whilst the camera is being viewed and
camera is offline or fails to connect to a network.
Online
By logging into WAN, the camera can be viewed using the
Ethernet (internet) cable or wirelessly.
blue when it is connected to a
Viewing
The User name and Password can be
found on the back of the camera.
9
grey if the
Offline