Managing The Camera Via Pc - Time2 User Manual

Managing your camera using your PC
Start up the IP Camera software via the "SYSM Monitor" shortcut
on your desktop, it will automatically search for the IP camera(s)
connected to your network.
Double-click the camera you want to use. In the main window the
camera image will appear.
Software features:
"Capture" – take a snapshot of what the camera is seeing.
"Record" – click to start
recording and click again to
stop recording.
"Listen" – click to activate
speaker
"Talk" – click to activate
microphone
"Vertical flip" – Flip the
image horizontally
"Mirror" – Flip the image
vertically
"Settings" – change camera
settings
The functions that are crossed out are not available for this
model. (Although the motion detection may not be available, this
can be found in Alarm Alert as previously shown)
13