Table of Contents
Advertisement
Automatic programmes
Notes on use
– The degree of doneness and brown-
ing levels are shown in a bar with
seven segments. The factory default
is always the middle setting. It will be
highlighted. To change the setting
simply move the highlighting to the
left or the right.
– The weight entry in the Automatic
programmes refers to the weight per
piece. For example, you can cook
just one piece of salmon weighing
250 g or 10 pieces of salmon, each
weighing 250 g at the same time.
– The oven interior needs to be at room
temperature before starting an Auto-
matic programme.
– When placing food in an already hot
steam oven, be very careful when
opening the door. Hot steam can es-
cape. Step back from the steam oven
and wait until the steam has dissip-
ated. When putting cooking contain-
ers or the condensate tray into the
oven or taking them out, take care
not to spill the contents. Avoid con-
tact with hot steam, and do not touch
the hot oven interior walls. Danger of
burning and scalding.
– For some Automatic programmes the
start time can be delayed using
at
or
Ready at
.
– To end an automatic programme
early, you do not need to switch the
steam oven off completely. Touch .
When
Cancel cooking?
.
Yes
50
Start
appears, select
– If by the end of an Automatic pro-
gramme the food is not cooked
enough, select
– Automatic programmes can also be
saved as
User programmes
.
Continue cooking
via .
Advertisement
Table of Contents
